Workshop and factory heating using wood or wood waste
The range of Fabbri wood burning workshop heaters have heat outputs from 29 to 410 kW. The range is suitable for burning all types of dry wood and secondary waste wood.
The fuel chambers are constructed of high grade stainless steel for long life, no fire bricks to change. The fuel is loaded through an upper separate large fuelling door while the ash is removed through a lower access door.
The models F28, F55sv and F85sv are available as natural flue draught
workshop heaters, while the F55cv, F85cv, F120, F240 and F350 are fitted
with flue fans to ensure good chimney operation.
Each model is fitted with a large capacity ventilation fan which passes air over the workshop heaters heat exchanger which is specially designed to be as efficient as possible. This results in lower fuel consumption and higher heat outputs. The ventilation fan is automatically activated by the on board controls when heat is produced. At the end of the burning cycle the fan automatically switches off. An override switch is included so during warmer weather the unit workshop heater can be used as a cooling ventilation system.
Models fitted with the external flue fan will ensure correct chimney operation
whatever the conditions.
Features
1. Ventilation air is drawn into the base of the workshop heater.
2. Grate is suspended above the base so ash can be removed from below.
3. Easy to remove access plate for flue way cleaning.
4. Upper loading door insulated with reinforced refactory brick.
5. Lower access door with safety plate to prevent system over firing.
6. Electrical control panel, including ventilation air temperature read out.
Simple cleaning and maintenance ensure reduced labour input. General maintenance is the removal of ash when required and once or twice a year a general clean.
If you have any questions or would like a price please come into our showroom or call us on 01885 482429
| Website by mediadog